16 min read

How to Build an MSP Sales Cadence That Converts

How to Build an MSP Sales Cadence That Converts
Outbound sales

How to Build an MSP Sales Cadence That Converts

A step-by-step guide to combining email, phone, LinkedIn and content into outbound that starts relevant business conversations, instead of asking for a meeting over and over again.

Find the angle for your next cadence

Pick who you are contacting and why now.

Who are you contacting?

What is the trigger?

Rapid growth cadence

Speak to business risk, productivity and growth

Answer why this company, and why now, then keep every touch relevant to the Managing Director or CEO.

Lead with
  • Onboarding
  • Security
  • Devices
  • Scalability
  • Internal support pressure
They likely care about
  • Business risk
  • Productivity
  • Growth
  • Customer experience
  • Technology costs

Built from the steps in this guide.

See example cadences ↓
25Steps from ideal customer profile to CRM
21Days in the example MSP SDR cadence
3Core channels: email, phone and LinkedIn
4Questions every sales cadence should answer
The short version
  • A sales cadence is a structured sequence across email, phone, LinkedIn and content, not just an email sequence.
  • Start with your ideal customer profile, the persona and a trigger: why this company, and why now?
  • Make each touch add something: an insight, a customer example, useful content or a different angle.
  • A practical starting point for cold outbound is 2–4 weeks, 6–10 touches, 3–5 emails and 2–3 call attempts.
  • Stop automated outreach once someone replies, and measure pipeline and new MRR, not activity.

Most MSP outbound campaigns fail for one of two reasons. Either there is too little follow-up. Or there is too much low-quality follow-up.

Too little

A salesperson sends one email. The prospect does not respond. The opportunity is abandoned.

A good MSP sales cadence

It creates enough consistent contact to build familiarity without becoming annoying. It combines several channels. It provides different reasons to engage.

Too much

At the other extreme, a prospect receives six generic emails, three LinkedIn messages and four calls in ten days.

Neither approach works particularly well. A good MSP sales cadence sits somewhere in the middle. And most importantly, it focuses on starting a relevant business conversation rather than simply asking for a meeting over and over again.

A strong sales cadence should answer four questions:

  1. Who are we contacting?
  2. Why are we contacting them?
  3. What channel should we use?
  4. What happens next if they do not respond?

When those questions are answered clearly, outbound sales becomes much more systematic. Here is how to build an MSP sales cadence that actually converts.

What is an MSP sales cadence?

An MSP sales cadence is a structured sequence of prospecting activities designed to create conversations with target accounts over a defined period.

The cadence may combine:

  • Email
  • Phone
  • LinkedIn
  • Content
  • Video
  • Events
  • Direct mail
  • Voicemail
  • Follow-up tasks

For example:

  1. Day 1Personalised email
  2. Day 3LinkedIn engagement
  3. Day 5Phone call
  4. Day 8Share relevant content
  5. Day 12Follow-up email
  6. Day 16Second phone call
  7. Day 21Final email and move to nurture

The exact sequence matters less than the principle. The salesperson should not need to decide from scratch every morning:

“What should I do with this prospect today?”

The process should already exist.

Why MSPs need a structured sales cadence

MSP sales cycles are rarely transactional. You are not selling a $50 product. You may be asking a business to replace a technology provider they have worked with for years. That involves trust. Timing matters.

The prospect may already have:

  • An existing MSP
  • An internal IT team
  • A contract
  • A strong relationship with its current provider
  • Competing business priorities

A prospect ignoring your first email does not necessarily mean:

“Never contact me again.”

It may simply mean:

  • They were busy
  • They missed it
  • The timing was poor
  • The message was not relevant enough
  • They need more context

A cadence creates persistence without relying on the salesperson's memory.

A sales cadence is not the same as an email sequence

This distinction matters. An email sequence is one component of a sales cadence. A sales cadence may include:

  • Email

    Direct messages and follow-up.

  • Phone

    Direct conversations and voicemail.

  • LinkedIn

    Research, engagement and connection.

  • Content

    Case studies, guides, benchmarks and insights.

  • Events

    Invitations and event follow-up.

A cadence should create several ways for a prospect to notice and engage with your business.

Relying entirely on email makes your sales strategy dependent on one inbox.

Plan the cadence: who, why, how and how often

Steps 1 to 6 settle who you contact, why you are contacting them, which channels you use and how you space the touches.

Step 1

Start with your ideal customer profile

Do not create one cadence for every business. Your cadence should reflect the prospect. For example, the messaging for:

A 50-person accounting firm

should probably differ from:

A 500-person manufacturing company with an internal IT team.

Before building the sequence, define:

  1. Company size
  2. Industry
  3. Geography
  4. Decision-maker
  5. Business problem
  6. Typical MRR
  7. Sales cycle
  8. Reason to change

A narrower audience makes the messaging far easier to personalise. If your profile could still describe almost any business, read If everyone is your prospect, nobody is your customer first.

Step 2

Know who you are contacting

Different stakeholders care about different outcomes. An MSP may need to prospect:

Managing Director / CEO

Likely concerns:
  • Business risk
  • Productivity
  • Growth
  • Customer experience
  • Technology costs

CFO

Likely concerns:
  • Cost predictability
  • Risk
  • ROI
  • Financial exposure
  • Vendor management

COO

Likely concerns:
  • Operational efficiency
  • Downtime
  • Staff productivity
  • Business continuity

IT Manager

Likely concerns:
  • Capacity
  • Security
  • Projects
  • Internal capability
  • Technical support

Your cadence can follow a similar structure while the messaging changes by persona. The angle finder at the top of this page pairs each persona with a trigger.

Step 3

Define the trigger

Generic prospecting starts with:

“We help businesses with IT.”

Better prospecting begins with:

“Why this company, and why now?”

Useful MSP trigger events may include:

  • Rapid employee growth
  • New office
  • Acquisition
  • New IT leader
  • Leadership change
  • Technology hiring
  • Cybersecurity incident
  • Compliance pressure
  • Contract expiry
  • Website activity
  • Event attendance
  • Funding
  • Business expansion

A trigger gives the outreach relevance.

Step 4

Decide what the prospecting objective is

The objective of the first touch is usually not:

Close the managed services agreement.

It is usually:

Start a conversation.

That may mean:

  • Get a reply
  • Confirm the right person
  • Understand the current situation
  • Establish interest
  • Book a discovery conversation

The smaller the initial ask, the easier it is for the prospect to engage.

Step 5

Use multiple channels

A good MSP sales cadence should usually include at least:

  • Email
  • Phone
  • LinkedIn

You may add:

  • Content
  • Video
  • Event invitation
  • Direct mail

Why? Because people respond differently.

One prospect ignores cold email but answers the phone.

Another never answers unknown numbers but is active on LinkedIn.

Another engages only after seeing your content several times.

Multiple channels increase the probability of creating awareness.

Step 6

Space the cadence properly

Do not contact someone every day unless there is a strong reason. The objective is consistent presence. Not pressure.

For many MSP outbound motions, a cadence over roughly three to four weeks can work well. For example:

  1. Day 1Personalised email
  2. Day 3LinkedIn engagement
  3. Day 5Phone call
  4. Day 8Second email with useful insight
  5. Day 12Phone call
  6. Day 16LinkedIn touch
  7. Day 21Final follow-up

Then move the account into nurture. The exact timing should be tested against your market.

Write emails, make calls and leave voicemails that land

Steps 7 to 12 cover the touches themselves: the first email, the follow-ups, the calls and the voicemails.

Step 7

Make the first email about the prospect

A weak first email often looks like:

“Hi John, we are a leading managed service provider offering cloud, cybersecurity, Microsoft 365, backup and IT support. Would you have 15 minutes next week?”

The prospect has learned almost nothing relevant to them. A better first email should focus on:

  • Their business
  • Their industry
  • A likely challenge
  • A trigger
  • A relevant outcome

For example: a growing professional services firm may receive messaging around the pressure growth creates on:

  • Onboarding
  • Security
  • Devices
  • Support
  • Microsoft 365 administration

That creates a more credible reason to engage.

Step 8

Keep cold emails short

Cold outreach is not the place for your entire service catalogue.

The prospect does not need:

  • Your company history
  • Every certification
  • Every service
  • Every customer type

A good first message should normally answer:

  • Why you?
  • Why now?
  • Why should I care?
  • What are you asking me to do?

Keep it simple.

Step 9

Make each touch different

Do not send:

  • Email 1: Can we meet?
  • Email 2: Just following up. Can we meet?
  • Email 3: Moving this to the top of your inbox. Can we meet?
  • Email 4: Thoughts?

Each touch should add something. For example:

  • Touch 1: Business problem.
  • Touch 2: Relevant insight.
  • Touch 3: Customer example.
  • Touch 4: Useful content.
  • Touch 5: Different angle.
  • Touch 6: Final check-in.

That is not a cadence. It is repetition. The prospect should gain some value simply from receiving the sequence.

Step 10

Use the phone earlier than you think

Many SDRs hide behind email because calling feels harder. But phone calls can create clarity quickly.

A 60-second conversation can determine:

  • Whether you have the right person
  • Whether the business fits your ICP
  • Whether timing is relevant
  • Whether there is a genuine problem
  • Whether the prospect wants further discussion

Phone should not be used only as the final desperate step. Include it early in the cadence.

Step 11

Do not over-script the call

Your SDR should have a framework. Not a robotic script. A useful structure may be:

  1. Context

    Why are you calling?

  2. Relevance

    What problem might be worth discussing?

  3. Question

    Is that relevant to them?

For example:

“We work with professional services firms around your size, and one issue we regularly see as they grow is internal IT support starting to become reactive. I was curious how you are handling that today?”

Now there is a conversation.

Step 12

Leave useful voicemails

If you leave a voicemail, keep it brief. Do not deliver a two-minute sales pitch. Give:

  • Your name
  • Company
  • Reason for calling
  • Simple next step

Where appropriate, connect it to an email. For example:

“I've also sent you an email with a little more context.”

This creates continuity across channels.

Use LinkedIn, content and case studies

Steps 13 to 16 turn research and useful material into better reasons to get in touch.

Step 13

Use LinkedIn for research before messaging

LinkedIn should not simply be another inbox. Before contacting the prospect:

  • Read their profile
  • Review their role
  • Check company activity
  • Look at recent posts
  • Identify mutual connections
  • Understand business changes

That information should improve the rest of the cadence. Sales Navigator can be particularly useful here.

Step 14

Engage before you pitch

If a target prospect posts regularly on LinkedIn, you do not necessarily need to immediately send a sales message. You can:

  1. Follow them
  2. Read their posts
  3. Comment where relevant
  4. Understand their priorities

The objective is genuine familiarity. Not manufactured engagement. Then when you do make contact, you understand more about the person.

Step 15

Use content as a sales tool

A useful piece of content can be one of the best follow-up touches in a cadence. Examples for MSP prospects might include:

  • Cybersecurity checklist
  • IT strategy guide
  • Microsoft 365 security guide
  • Business continuity checklist
  • Cyber insurance readiness assessment
  • Technology budget template
  • IT maturity assessment
  • Case study
Instead of:

“Just following up.”

you can say:

“We recently put together a checklist on this issue that may be useful.”

That is a much better reason to contact someone again.

Step 16

Use case studies to create credibility

Case studies work particularly well later in the cadence. The prospect has already seen your name. Now show evidence.

The strongest case study should resemble the target account. For example: if you are targeting accounting firms, use an accounting-firm example. If you are targeting 100-person businesses, do not lead with a case study about a 5,000-person enterprise.

Relevance increases credibility.

Build cadences by industry, trigger and account

Steps 17 to 20 make the cadence specific to the market, the moment and the whole buying group.

Step 17

Build cadences by industry

This is one of the easiest ways to improve MSP outbound. Instead of one generic sequence, create:

  • Legal cadence
  • Accounting cadence
  • Construction cadence
  • Financial services cadence
  • Manufacturing cadence

The structure may be the same. The problems, examples and content change. That allows your SDR to sound significantly more relevant.

Step 18

Build cadences by trigger

You can also create trigger-based sequences. For example:

New IT Manager cadence

Messaging around:
  • First 90 days
  • Capability
  • Projects
  • Existing providers
  • Support capacity

Rapid growth cadence

Messaging around:
  • Onboarding
  • Security
  • Devices
  • Scalability
  • Internal support pressure

New office cadence

Messaging around:
  • Networking
  • Connectivity
  • Wi-Fi
  • Security
  • User setup

Contract review cadence

Messaging around:
  • Benchmarking
  • Service quality
  • Cost
  • Strategic fit

This creates far more contextual prospecting.

Step 19

Multi-thread strategic accounts

Do not run a 30-day cadence against one IT Manager while ignoring everyone else. For higher-value target accounts, identify several stakeholders. You may contact:

  • IT Manager
  • COO
  • CFO
  • Managing Director

Do not send identical messages to all four. Each person should receive messaging aligned with their role. This increases the chance of finding an entry point into the account.

Step 20

Use account-level cadence, not just contact-level cadence

This is an important distinction.

Traditional sales sequences ask:

What happens next with this contact?

Account-based prospecting asks:

What happens next with this company?

For example:

  1. Week 1:Email IT Manager.
  2. Week 2:Call IT Manager and connect with COO.
  3. Week 3:Share industry content with COO.
  4. Week 4:Invite CFO to relevant event.

You are building familiarity inside the account rather than endlessly chasing one person.

Handle replies, nurture and your CRM

Steps 21 to 25 decide what happens around the outreach: replies, nurture, when to stop, your systems and where to personalise.

Step 21

Define what happens when someone replies

A response should immediately change the cadence. For example:

  • Positive reply

    Stop automated outreach.

    Move to qualification.

  • “Not now”

    Capture timing.

    Move to nurture.

  • Existing MSP contract

    Record contract review date.

    Schedule future follow-up.

  • Wrong person

    Ask who is responsible.

    Update CRM.

  • Not interested

    Determine whether this is permanent or simply timing.

Do not continue a generic sequence after somebody has replied.

Step 22

Create a nurture cadence

Not every prospect should remain in active outbound. A prospect may be perfect for your MSP but not ready today. Move them into nurture. A nurture cadence may include:

  • Monthly newsletter
  • Quarterly personal follow-up
  • Event invitations
  • Relevant content
  • Industry insights
  • Contract review reminders

The goal is to remain visible until timing changes.

Step 23

Know when to stop

Persistence matters. Harassment does not. After the active sequence ends, stop repeatedly contacting the prospect unless there is a new reason. Move them into nurture. Wait for:

  • New trigger
  • Job change
  • Company growth
  • Website activity
  • Event engagement
  • Contract timing

Then re-engage with new context.

Step 24

Build the cadence into your CRM

Do not rely on your SDR's memory. The cadence should be built into your sales system. Depending on your CRM or sales engagement platform, that may include:

  • Tasks
  • Sequences
  • Reminders
  • Call queues
  • Email templates
  • Next-action dates

The system should tell the salesperson what needs to happen next.

Step 25

Personalise the first and most important touches

Not every touch needs to be individually handcrafted. But the most important ones should feel relevant. Consider stronger personalisation for:

  • First email
  • Tier 1 accounts
  • High-value prospects
  • Trigger-based outreach
  • Executive contacts

Lower-value follow-up can be more templated. This gives you the right balance between scale and relevance.

Three example MSP sales cadences

Pick an example, then tap a day on the timeline to see what happens on that touch.

Example: A 21-day MSP SDR cadence

Here is a practical starting point.

  • 8 touches
  • 2 messages
  • 2 calls
  • 2 LinkedIn
  • 2 value

Touch 1 of 8 · Day 1 · Message

  1. Day 1

    Research + personalised email

    Research:

    • Company
    • Persona
    • Trigger
    • Existing relationships

    Send a short message around a relevant problem.

  2. Day 3

    LinkedIn research and engagement

    Review recent activity. Follow or connect where appropriate.

  3. Day 5

    Phone call

    Attempt direct contact. If voicemail, reference the original email.

  4. Day 8

    Value email

    Share:

    • Insight
    • Checklist
    • Case study
    • Relevant article

    Do not simply ask again for a meeting.

  5. Day 11

    LinkedIn touch

    Engage with relevant activity or send a contextual message where appropriate.

  6. Day 14

    Second call

    Use a different angle based on the account.

  7. Day 17

    Social proof email

    Share a short relevant customer example.

  8. Day 21

    Close-the-loop email

    Keep it professional. For example:

    “It sounds like this may not be a priority at the moment, so I'll stop chasing. If things change around [relevant issue], happy to compare notes.”

    Then move the prospect to nurture.

How long should an MSP sales cadence be?

There is no universal answer. A good starting point for cold outbound is often 2–4 weeks with perhaps 6–10 touches across several channels.

  • 2–4 weeksActive cadence for cold outbound
  • 6–10 touchesAcross several channels
  • 3–5 emailsCombined with calls and LinkedIn
  • 2–3 callsAttempts during the active cadence

Higher-value strategic accounts may justify longer engagement. Lower-value opportunities may justify shorter sequences. What matters most is whether the touches remain relevant. Do not add more steps just to increase the number of touches.

How many emails should be in an MSP sales cadence?

Again, there is no magic number. A practical cadence might contain 3–5 emails combined with calls and LinkedIn activity. The mistake is relying entirely on email.

Three good emails plus two calls and relevant LinkedIn engagement

can often be more effective than 12 automated emails.

How many calls should be in an MSP sales cadence?

For many outbound sequences, consider at least 2–3 call attempts during the active cadence. Phone is particularly useful for:

  • Confirming the right contact
  • Understanding timing
  • Handling objections
  • Booking meetings

Do not assume a prospect is uninterested simply because they did not reply to email.

When is the best time to call?

There is no universal perfect calling time. Your SDR should test:

  • Morning
  • Late morning
  • Early afternoon
  • Late afternoon

Results may differ by industry and market. The more important factor is consistency and measurement. Track connection rate by time and adjust based on your own data.

Measure the entire cadence

Do not measure only email open rates. Track commercial outcomes. Useful metrics include:

  • Email metrics

    • Reply rate
    • Positive reply rate
  • Phone metrics

    • Connect rate
    • Conversation rate
  • Engagement metrics

    • Meetings booked
    • Meetings held
  • Commercial metrics

    • Qualified opportunities
    • Pipeline created
    • New MRR

Ultimately:

Did the cadence create revenue?

For the wider set of numbers to watch, see key sales KPIs to track for sustainable growth.

Calculate meeting conversion

Suppose your SDR works 500 prospects. The cadence creates 50 positive conversations, 20 meetings, 10 qualified opportunities and 3 customers. You can now calculate:

Meeting conversion calculator

Pre-filled with the example above. Change any number to use your own cadence results.

Stage-by-stage conversion
  1. Prospect-to-conversation:10%
  2. Conversation-to-meeting:40%
  3. Meeting-to-opportunity:50%
  4. Opportunity win rate:30%

Lowest conversion: prospect-to-conversation (10%). Start your tests there.

167prospects worked per new customer
7meetings per new customer

Now you know where to improve.

Test one variable at a time

Do not change everything simultaneously. If results are poor, test:

  • Subject line
  • First sentence
  • Call-to-action
  • Persona
  • Industry
  • Timing
  • Channel
  • Content offer

Change one variable. Measure the result. Otherwise, you will not know what caused the improvement.

Build a sales cadence feedback loop

Your SDR hears the market every day. Use that information. Every week ask:

Weekly cadence review

Tick each question off in your weekly sales meeting. Nothing you tick is stored or sent anywhere.

0of 5 reviewed

Feed those insights back into:

  • Marketing
  • Positioning
  • Content
  • Sales scripts
  • ICP

Your cadence should continually improve.

Common MSP sales cadence mistakes

  1. Sending the same message repeatedly

    Every follow-up should add value.

  2. Asking for a meeting too quickly

    Give the prospect a reason to care first.

  3. Relying only on email

    Use phone and LinkedIn.

  4. Making the sequence too long

    More touches do not automatically mean better results.

  5. Making the sequence too short

    One email is not enough to determine interest.

  6. Ignoring trigger events

    Timing can dramatically improve relevance.

  7. Over-automating

    Prospecting should still feel human.

  8. Using the same cadence for every persona

    A CFO and IT Manager care about different things.

  9. Not stopping after a reply

    Once a prospect responds, switch to a human conversation.

  10. Measuring activity instead of pipeline

    The goal is qualified sales opportunity.

The difference between persistence and annoyance

Persistence means:

  • Multiple relevant touches
  • Different channels
  • Different angles
  • Useful content
  • Respectful timing

Annoyance means:

  • Repeating the same message
  • Contacting daily
  • Ignoring replies
  • Creating false urgency
  • Continuing after clear rejection

A good cadence should make your MSP appear:

Professional, relevant and consistent. Not desperate.

Build cadences around your best customers

Review how your existing best customers originally entered the business. Ask:

  1. What problem were they solving?
  2. Who was involved?
  3. What triggered the conversation?
  4. What content mattered?
  5. How long did the process take?

Use those insights to build future cadences. Your existing customers can tell you a great deal about what future customers may respond to.

The role of an SDR in an MSP sales cadence

A dedicated Sales Development Representative can own much of the process. That may include:

  • Account research
  • Contact research
  • Email outreach
  • Calls
  • LinkedIn
  • Content follow-up
  • Qualification
  • CRM management
  • Meeting booking

The SDR should not simply execute a script. They should continuously improve the cadence based on prospect feedback. This is what makes dedicated sales development capability valuable.

Explore the roles Dijital Team provides →

The bottom line

A good MSP sales cadence is not a series of automated emails. It is a structured process for creating relevant, consistent conversations with companies you genuinely want as customers.

  1. Start with your ICP.
  2. Identify the right accounts.
  3. Identify the right people.
  4. Look for triggers.
  5. Use multiple channels.
  6. Give every touch a purpose.
  7. Provide value.
  8. Measure conversion.
  9. Move good prospects into sales.
  10. Move the rest into nurture.
  11. And keep improving the cadence based on real results.
The objective is to move from:

“We sent some emails and nobody replied.”

to:

“We have a repeatable prospecting system that creates qualified conversations every week.”

That is what a strong MSP sales cadence should do.

Frequently asked questions

An MSP sales cadence is a structured sequence of sales activities across channels such as email, phone and LinkedIn designed to create conversations with target prospects.

There is no universal number, but a practical cold outbound cadence may contain roughly 6–10 touches across two to four weeks, depending on deal value and level of personalisation.

A typical active sequence may run for two to four weeks before the prospect is moved into longer-term nurture.

Email, phone and LinkedIn are common core channels. Content, events, video and direct mail may also be used for higher-value or strategic accounts.

A practical sequence might contain three to five emails alongside phone and LinkedIn activity.

Yes. Phone calls can help identify the correct contact, understand timing and create conversations faster than email alone.

The first email should focus on a problem or business outcome relevant to the prospect rather than listing your MSP's services.

No. Some touches should add value through insights, customer examples, useful content or relevant observations.

After a reasonable active cadence without engagement, move the prospect into nurture rather than repeatedly contacting them. Re-engage when a new trigger or reason emerges.

An email sequence contains only email outreach. A sales cadence can include email, phone, LinkedIn, content and other channels.

The highest-value touches should be personalised, particularly the first message and outreach to strategic accounts. Lower-value follow-up can use structured templates where appropriate.

Track positive replies, conversations, meetings held, qualified opportunities, pipeline created and new MRR rather than relying solely on calls or emails completed.

There is no universal benchmark. The most useful approach is to establish your own baseline and improve conversion by ICP, persona, industry and channel over time.

Usually, yes. The structure may remain similar, but messaging, customer examples, business problems and content should be adapted to the target industry.

No. Executive, finance, operations and technology leaders often care about different business outcomes, so messaging should be adjusted accordingly.

Record the reason and timing in your CRM and move the prospect into a nurture process with an appropriate future follow-up date.

Sales Navigator can help identify target accounts, research decision-makers, find trigger events and provide context that makes outbound messaging more relevant.

Yes. This is often one of the core responsibilities of a dedicated Sales Development Representative.

Next step

Need someone to own your MSP outbound sales cadence?

Building the cadence is only part of the work. Someone still needs to execute it consistently.

A dedicated Sales Development Representative from Dijital Team can become an embedded member of your sales team and take ownership of:

  • Target account research
  • LinkedIn Sales Navigator
  • Prospect identification
  • Outbound email
  • Cold calling
  • LinkedIn engagement
  • Lead follow-up
  • CRM management
  • Qualification
  • Meeting generation
  • Pipeline creation

Instead of asking your founder or senior salesperson to prospect whenever they have spare time, your SDR can create consistent top-of-funnel activity every week.

Reach the right accounts. Follow up consistently. Start more conversations. Build more pipeline.

Talk to Dijital Team about hiring an SDR →

ISO 27001 certified. Trusted by 120+ MSPs and ITSPs.